First Fullish-Family Sail

My mother and father sailing Errant, June 2015.
My mother and father sailing Errant, June 2015.

Following the most idyllic bike ride this morning, I headed out on Lake Champlain with my parents and sister for a almost-full-family inaugural sail. Perhaps we’ll manage a full-full-family sail when my brother arrives in a little over a week?

Loosely Logged…

We had motored out of my slip at the Essex Marina and begun hoisting the sails when I remembered that I wanted/needed to install the reefing system for the mainsail.

I still need to rig one or two reefing points. I’ll try to take care of that over the course of the week… (First Sail 2015)

Fortunately I found some spare hardware aboard and managed to temporarily rig the first reef, and it turned out to be essential. The initially light 6-8 know winds quickly built to the mid-teens and before long were +/-20 knots.

I’ve now that I’ve discovered firsthand how easy and useful it is to reduce the mainsail area.

This was my first time using the reefing system, and I’ve now that I’ve discovered firsthand how easy and useful it is to reduce the mainsail area, I’m going to hustle up the requisite hardware so that I have two ready reef options from now on.

I also reefed the genoa’s roller-furler twice as the wind built. It was a powerful learning experience.

This spring while working on Errant in the shipyard at the Willsboro Bay Marina I met a friendly fellow who was spring commissioning his sloop nearby. He impressed upon me the importance of reefing and assured me that the boat would perform better once I became accustomed to reefing during heavy winds. I explained that my sailing experience is primarily rooted in small boat sailing and sailboarding which made me greedy, hesitant to sacrifice sail area when the wind was whipping. But today I learned that he’s right. The boat doesn’t round up or wallow, and no water helm to wrestle with. And I was actually able to increase my hull speed when reefed, which was an important if overdue lesson to learn.

My sister and my father sailing Errant, June 2015.
My sister and my father sailing Errant, June 2015.

Furler Foibles

We knocked around for a few hours taking turns at the helm and familiarizing ourselves with the ins-and-outs of this user-friendly Catalina 310. Once we were ready to wrap up and head in, I asked my father to furl the genoa. I rounded up into the wind, and he pulled the roller-furler line. It wouldn’t budge. He took the wheel and I tried. Nothing.

I realized that the spinnaker halyard had become tangled in the roller furler when I reefed it earlier. How? I had secured the spinnaker halyard to the bow pulpit this winter to keep it from slapping against the mast, and I forgot to switch it over when I launched. I had noticed the halyard flapping in the wind earlier in the day, and I’d made a mental note to secure it to the mast as the end of the day. Not soon enough!

By unfurling the genoa and tightening the spinnaker halyard so that it wouldn’t re-tangle, I was able to solve the problem. Relieved. I promised myself to become more detail oriented going forward.

Docking

Docking still revs up my anxiety meter… [so] I arrived at the Essex Marina with a twinge of dread. (First Sail 2015)

I was well protected from the wind and waves when I arrived at the marina, and with the advantage of a full crew to handle lines and fenders I was able to execute a relatively confident and wholly successful docking. I’m developing a slightly more intuitive understanding for Errant under engine power, but there’s still plenty to learn before I will feel as comfortable docking 11,000 pounds of fiberglass (plus plenty of windage) with a small two bladed prop and a 25hp diesel engine as I do a powerboat. But each successful docking brings me a little closer to the goal!